Friday 21 August 2015

"And I thought they smelled bad....on the outside!"

Being a LEGO Star Wars collector can be a pretty thankless task at times, particularly if you have completist tendencies. If it isn't the countless remakes, many of which seem little changed from the previous versions, it's all the blasted event exclusives and limited edition promos. These tantalising chase items, which are generally only available in small numbers, have been the subject of numerous Gimme LEGO rants over the years (for instance here and here), and I've long given up trying to collect them all. That having been said, I'm always delighted to pick up these curios when the opportunity arises, and I got lucky recently, managing to score the item below from a fellow member of the Brickset Forum.


The set in question is designated LLCA53 Han Solo On Tauntaun in the Brickset database, and it's apparently owned by just 14 of Brickset's 117,000+ registered members. The previous owner was given the set by LEGOLAND California as a thank-you for contributing Lego Star Wars photographs to their Fan Gallery, although it appears that the sets were originally designed for Ambassador Pass holders attending the 2011 Master Model Builder Class. The set wasn't supplied boxed - the elements are divided between three numbered grip-seal bags which are themselves packed into an opaque LEGO Factory bag along with six folded and loosely stapled sheets containing the building instructions. The instruction sheets are colour printed on both sides; the artwork above can be found at the top of the first page while the inventory of parts below (click to enlarge) is printed on the back of the last page. The quality of the printing isn't up to retail standards from the perspective of either sharpness or colour representation, which isn't altogether surprising in a promo set such as this.


Bag 1 contains the parts needed to build the display stand, which is of course designed to look like snowy terrain, and the tauntaun's feet. This stage of the build utilises common elements - only the six tan modified 1 x 1 plates with tooth which form the claws on the tauntaun's feet could be described as remotely uncommon, and even these have appeared in 20 sets to date.


Bag 2 contains the parts needed to build most of the tauntaun plus its harness. Once again, the parts used appear to be unremarkable - predominantly light bley slopes of various types with a few common plates, small bricks and clips thrown in for good measure. Certainly I don't think sourcing them would be too much of an issue for would-be builders. A number of SNOT bricks, specifically 1 x 1 bricks with a stud on one side, are utilised to hold the harness in the correct alignment and provide an attachment point for the tauntaun's puny T-Rex-like upper limbs. The tail is suspended from beneath the body and doesn't actually touch the ground, with the consequence that it's relatively fragile and liable to fall off if not handled carefully.


So far so good, but the magic really happens when the contents of Bag 3 come into play. First a brick-built reddish brown saddle with a couple of saddle bags is constructed (below) and it's here that sourcing the parts you'd need to exactly replicate the build starts to get a bit more challenging. The saddle incorporates a pair of reddish brown modified 1 x 2 plates with handle on side and free ends which have only ever appeared in eight retail sets. Worse still is the use of two reddish brown modified 1 x 1 plates with horizontal clip. These are used to attach the saddle bags to the saddle, and according to Bricklink they've never actually appeared in a retail set, so you might need to substitute these with equivalent elements in a different colour unless you have access to a LEGOLAND model shop.... I'm afraid that it's a similar story with the pair of reddish brown modified 1 x 1 plates with vertical clip used to attach Han's pack to the back of the saddle - these have also apparently never appeared in a retail set, although thankfully a close variant is available in reddish brown.


With the saddle complete it's time to build the tauntaun's head and carefully mount it on top of the neck. It's quite a job to wedge the pair of light bley 1 x 1 tiles into the clips on the top of the head to form the ears, and it places considerable stress on the clips which is why LEGO defines this as an 'illegal' building technique and doesn't normally permit its use in official sets. With the tauntaun now complete, all that's left to do is build the intrepid rider who is of course Han Solo. Han's dark tan legs are attached to his torso by way of a pair of 2 x 2 turntables; these allow the legs to be rotated outwards so as to adopt a more natural riding position. Once completed, Han can be carefully lowered into the saddle and handed the tauntaun's reins, at which point we're done!



You can see the completed build in the pictures above and below. Although the tauntaun is attached to the base, there is some scope for posing the model, albeit limited - the position of the tauntaun's upper limbs can be adjusted, and Han's head can be rotated and his arms bent. It wouldn't take much modification to enable the tauntaun to turn its head as well if desired


For all their rarity value and collectability, I've often felt that many of the LEGO Star Wars promo items aren't especially interesting in their own right, but that's certainly not the case for this model which is superb. I've always had huge admiration for builders who can transcend the crudeness which is inevitable at this scale and craft models which are elegant and immediately recognisable, and I'd say that this is a perfect example of that art. On the downside the build got a bit fiddly towards the end, and the completed model isn't as robust as a typical retail offering, but really these are trifling details; it's a lovely display piece and it'll take pride of place alongside some of my other LEGO Star Wars favourites.


I'd like to offer my thanks to fellow Bricksetter Mark a.k.a. smokebelch for selling the set to me for an amount which, while admittedly not exactly cheap, was still a long, long way short of the ridiculous sums being asked by sellers on Bricklink; in case you're wondering, at the time of writing there were only two of these sets listed for sale on Bricklink, and at $1,995 and $3,500 respectively they might remain unsold for a while yet.... Unless you're a lottery winner, your best best would be to just source the 336 parts needed to build the model yourself - the vast majority are fairly common and inexpensive, and those that aren't can be readily substituted by alternative parts; I'll aim to scan the instructions and upload them to the Gimme LEGO Flickr stream here over the next week or so which will make it easier for you to build your own copy if you wish.

18 comments:

  1. Nice pictures! Old or new camera?

    ReplyDelete
  2. You could use some white jumpers and clear pieces to connect the tail to the base, so it won't want to fall off.

    ReplyDelete
    Replies
    1. Great idea, or better still use trans-clear jumpers if you can lay your hands on some.

      Delete
    2. I wasn't aware those existed.

      Delete
    3. Trans-clear jumpers have never appeared in a retail set but they've been available to LEGOLAND modelmakers at various times and sometimes appear on Bricklink etc.

      Delete
  3. His coat was Brown!!!!

    ReplyDelete
  4. I don't think 1x1 tiles fixed to clips is considered illegal any more, as the 2015 helicarrier set uses that technique.

    ReplyDelete
    Replies
    1. Interesting.... Even so, I'd be surprised to see the technique make it into many mainstream sets as it took considerable force to get the tiles into the clips, so much so that it felt like the clips might break at any moment...

      Delete
    2. The reason they're allowing it now is that they changed the design of the clips, so they don't resist being stretched so much.

      Delete
  5. 31039 Blue Power Jet is a bit more mainstream :)

    ReplyDelete
  6. Nice! I've been on a miniland scale kick recently and this will make a nice addition. Do you still intend to scan and post the instructions?

    ReplyDelete
    Replies
    1. Yes I do, and apologies to those folks who've been in touch to ask about this. Life sometimes gets in the way of LEGO, but it's still very much on the "to do" list.

      Delete
    2. No apologies needed! Your photos are clear enough, it's fairly easy to see how it's constructed as is. I'll hang tight.

      Delete
  7. As a Lego Ambassador, I have one of these sets. The above comment about being fragile is spot-on; one touch and it disintegrates!

    Not having a safe enough location to permanently display it (or the patience to once again build it - yes, it was that frustrating), I'm considering selling it. What would the best way to go about it?

    ReplyDelete
    Replies
    1. I bought my copy from a fellow Brickset Forum member, but if you'd rather sell on a dedicated marketplace then I guess you're looking at Bricklink or alternatively eBay.

      Delete
  8. I saw this review when it was recently posted on Brickset (April 2020 at time of writing) and I felt compelled to write a comment about the current availability of the rare reddish brown pieces. I thought I'd post it here too, if that's okay.


    "modified 1 x 2 plates with handle on side and free ends" ( https://www.bricklink.com/v2/catalog/catalogitem.page?P=2540&name=Plate,%20Modified%201%20x%202%20with%20Handle%20on%20Side%20-%20Free%20Ends&category=%5BPlate,%20Modified%5D T=C) has since appeared in several Cars sets as Mater's rearview mirrors. It's now very common.

    "modified 1 x 1 plates with horizontal clip" ( https://www.bricklink.com/v2/catalog/catalogitem.page?P=61252 T=C) has since appeared in 1 set, the Rocket and Groot Brickheadz, but unfortunately it still seems to be rare (right now there are only 6 for sale on bricklink). However, you could substitute the newer 1x2 variant of the part ( https://www.bricklink.com/v2/catalog/catalogitem.page?P=63868 T=S&C=88&O={%22color%22:88,%22iconly%22:0}), which is very common in reddish brown.

    "Modified 1x1 plates with vertical clip" ( https://www.bricklink.com/catalogItemIn.asp?P=4085b&colorID=88&in=A ) has since appeared in 5 sets, although in 4 of them it was an alternate to the newer mold/variant of the part Dave mentioned. Despite that, as far as I could tell it's still cheaply available now.

    ReplyDelete